| Customization: | Available |
|---|---|
| Barriers Type: | Electric Shock Net |
| Effectiveness: | Long-term |
|
Still deciding? Get samples of US$ 170/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Function |
Mosquito + intelligent control |
|
Rated frequency |
50/60Hz |
|
High voltage of the power grid |
2500-3000V |
|
Mosquito killing power |
48/72/96W |
|
Light source type |
2G11UV dual color lamp tube |
|
Lamp color |
true qualities |
|
Lamp size |
75X 23*96CM 124*23*96CM |
|
Lamp body material |
Aluminum+Stainless Steel |
|
Scope of application |
500-800 sqm |
1, Introduction to mosquito killer lamp:
Mosquito killing lamp is a practical method of capturing mosquitoes by releasing a beam of chemical substances to lure them according to their living habits, and then using a negative pressure device to catch them Environmental protection equipment and mechanical devices.
Utilizing mosquitoes to attract light, move with air currents, be sensitive to temperature, and prefer to gather in groups, especially by chasing carbon dioxide breath and seeking sex pheromones A highly efficient and environmentally friendly hunting tool developed based on the habit of coming. When mosquitoes fly towards the ultraviolet fluorescent tube due to phototaxis, they will Killed by the high-voltage power grid to achieve the goal of killing mosquitoes and insects.
Lamps have the characteristics of energy saving, non radiation, economic applicability and high efficiency, and do not require the use of any chemical mosquito killing substances, making them a relatively environmentally friendly option
Protect the mosquito killing method.
2, Product Instructions:
1. This product is suitable for outdoor occasions. When selecting the product, the appropriate model should be chosen based on the density of mosquitoes and the area of the usage site
When installing the product, try to avoid being close to strong light sources, trees, and other objects to achieve the best effect.
2. Before use, it is necessary to check whether the power supply and voltage meet the product requirements. The AC/220V -50Hz AC access port must be used
When connected to a fixed power supply line using a three wire connection method and grounded properly, a full pole disconnect with a contact distance of at least 3mm should be installed Leakage switch.
3. If the usage location is a place with high mosquito density, the internal killing power grid should be cleaned frequently (it is recommended to clean it once every 1-3 days) to ensure safety
To verify the effectiveness of the product, the power must be cut off before cleaning, and the insect corpses hanging on the power grid must be cleaned with a brush.
4. The voltage of the power grid is 2-6KV. Please do not touch it when powered on and pay attention to safety (the product current is controlled within 5mA, which will not harm the human body)
5. Special mosquito attractant tubes are fragile items, be careful when cleaning.
6. This product is designed with intelligent light control. It shuts down during the day and automatically turns on when the light reaches a certain level of darkness at night (regular intervals are required)
Gently wipe the light control point to avoid light control failure.
7. Interchangeable light source: T4 H-type dual light source tube 24V for some models in the product series
Warning:
1. Please do not directly sprinkle water on the mosquito killer lamp to avoid the risk of electric shock (with moisture-proof and rainproof safety function markings) Except for products.
2. When using extension cords, keep the power output socket away from moisture and avoid damaging the wires.
3. This product should be avoided from direct contact with children.
4. This product cannot be used in places where flammable gases or explosives may be stored. Please ensure high voltage near the installation of lighting fixtures Danger signs.
3, Series product fault maintenance guidance
Before repairing, please carefully check the following conditions:
1. The light tube is not working, please check if the lamp head is loose or if the light tube wire is burnt out, and if the rectifier is burnt out. If it is burnt out, please replace it.
2. High voltage is not obvious or there is no high voltage: first check whether there are a large number of insect corpses hanging on the power grid, clean up the hanging insect corpses, and if not Restore high voltage, please check the high voltage pack. If it is burnt out, please replace it.
3. Short circuit phenomenon: Please check whether the connecting wires of each wiring part, especially the lamp head part, have been shaken off during transportation. If they have fallen off, please check
Please reinstall it.
4, Common knowledge of using mosquito lamps
1. The outdoor mosquito killer lamp is designed based on the principle of using specific wavelength light waves to attract mosquitoes into the lamp and kill them by touching the high-voltage power grid inside the lamp This must be used correctly in order to achieve its intended effect.
2. Before using the lamp, it is necessary to evaluate the usage situation and scope in combination with the site, especially to avoid placing the lamp under strong light, so as not to weaken the working effect of the mosquito killer lamp due to strong light interference with the light wave of the mosquito killer lamp. Try to avoid using in crowded places as mosquitoes tend to attract them
The characteristics of human body odor and infrared information emitted by the human body may reduce the effectiveness of use.
3. Correct usage method: The mosquito killer lamp should be placed in a dark place, and trees and other objects should be avoided as much as possible to make the mosquito killer lamp more effective To achieve the desired effect.
5, Warranty terms:
1. Mosquito killer lamp products have a one-year warranty period for the lamps, including a one month warranty period for the lamp tubes (if there are any problems within one month, a new lamp tube will be replaced).
2. From the date of purchase, in case of malfunction under normal use, please provide the product, sales receipts, and product service in accordance with the warranty terms
Provide warranty services for business cards
3. Due to the following and similar situations, faults caused by personal factors of the purchaser are not covered by the warranty:
3.1 damage caused by errors, abnormal use, or unauthorized modifications or disassembly;
3.2 damage caused by abnormal voltage or lack of reasonable maintenance.
3.3 Malfunctions and damages caused by accidental falls during use or handling,
3.4. If the issue cannot be resolved after technical communication, our company will arrange for a return to the factory for repair within 48 hours
3.5. After the product is repaired and processed, the shipment will be rescheduled
){kind=link}